The T series systems have a 10 year shelf life. You can store or use the systems for up to 10 years. The working life of the system is up to 10 years and replacing it depends if it has been damaged or shows signs of wear and tear.
Engine rooms can be found in boats, mobile machinery and some fixed applications. As long as the total volume of the room does not exceed the maximum volume coverage of the T Series or C series products, then yes it can be used in an engine room. Considerations need to be made if there is
Due to physical and chemical properties of the agent, pressure in the tube can vary depending on the ambient temperature. The higher the ambient temperature, the higher pressure in the tube and vice versa. At very low temperatures, the pressure gauge can be seen near zero due to the low pressure of agent vapours. When
In the event of a fire, the BlazeCut T series system will automatically rupture its tube to release the fire extinguishing agent into the protected area such as the engine bay. This 24/7 automatic process ensures you can focus to safely exit the vehicle and move away from the risk area. However, we strongly recommend
No only one BlazeCut T series system is to be installed to cover the enclosure. 2x 2m lengths is not the same as 1x 4m length, because if there was a fire then it is possible that only 1 of the 2m system would discharge and the gas volume would not be enough to suppress
The BlazeCut tube is heat sensitive. When it reaches a sustained 105 degrees Celsius, a hole is melted in the tube forming the nozzle and releasing the HFC-227ea. The extinguishing agent siphons heat from fire, disrupts the reaction of burning, slows this reaction and suppresses the fire. The amount of agent released into the enclosure
